BRR-11-S074 Michelangelo Medallion

MICHELANGELO MEDALLIONS

uDecor, Inc. provides a LIMITED 5 YEAR WARRANTY to the original purchaser of our Michelangelo series of ceiling medallions. This LIMITED WARRANTY provides that the Michelangelo Medallion will be free from defects under normal and expected use for a period of five (5) years from the date of purchase. This warranty does not encompass all of the products sold by uDecor, Inc. and is exclusive to our Michelangelo Medallions only. Other products may carry their own manufactures warranty. Call us at 1-877-550-0600 for details.

Michelangelo Medallions are for decorative use only and cannot support the weight of a light fixture or ceiling fan. Your fixture/fan must be supported by the junction box or other support system separate of the Michelangelo Medallion.

The Michelangelo Medallion must be installed in accordance with the supplied instructions. Neglecting to install the medallion in alignment with the instructions can cause serious structural stress on the medallion resulting in premature failure.

This warranty does not cover the failure of customer-applied finishes or any damage resulting from the application of customer-applied finishes. The customer is responsible for ensuring that any additional finish is compatible with the base material.

If the Michelangelo Medallion proves to be defective and has been installed and existed within the bounds of the above requirements, the customer should contact uDecor, Inc. in writing or by phone within 30 days of discovering the material defect. uDecor, Inc. may require digital images, a sample of the material or a combination of material and images to be sent to uDecor, Inc. for evaluation. Upon review of materials and installation methods, uDecor, Inc. will determine if replacement, repair or refund is appropriate. uDecor, Inc. is not liable for the cost of labor, transportation, or any other expenses incurred in conjunction with the purchase, use, and installation of the material.

This limited warranty does not cover damage from the result of mishandling in transportation, acts of God, customer modifications, vandalism, misuse, abuse, improper maintenance, unreasonable care, or other causes that did not arise from manufacturer defects in workmanship and/or materials. No person or entity is authorized to change, modify, or amend the terms of this limited warranty in any manner.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. This warranty applies to our Michelangelo Medallions only.

Contact: uDecor, Inc. • 8302 Espresso Drive, Suite 130 • Bakersfield, CA. 93312 • 877-550-0600 • www.uDecor.com

Our Michelangelo Series of medallions come completely finished and ready to install on your ceiling. The medallions project 3-4" out from the ceiling so they provide another element of depth to the room. They are built from fiberglass, pvc, and other high-impact materials and come ready with a hole in the center for your lighting fixture. If you are not installing a lighting fixture with the medallion then you can still use these by ordering a small rosette to cover the medallion's center hole.

The ceiling medallions are flat on the back so they can be installed on any flat ceiling or wall. They are delivered fully assembled so they are easy to install. Since these are large medallions be sure to have at least 2 people involved with the installation.

Installation Instructions

Step 1 - Getting Started
If you are installing the medallion with a ceiling fan, chandelier or light, make sure the power is shut off at the breaker before attempting installation. Turning off the light switch WILL NOT prevent you from being shocked. If you have any doubts call an electrician.

Medallions are for decorative purposes only and cannot support the weight of a fan or light fixture. Your fixture must be supported by a support or junction box in the ceiling.

Step 2 - Aligning the Medallion
Using your center point or fixture as a reference, lightly mark the ceiling with pencil where the perimeter of the medallion will be.

Step 3 - Adhesive
The adhesive should be applied liberally to the backside of the medallion where it touches the ceiling. Sheetrock screws will secure the medallion while the adhesive sets. You can use any adhesive that is rated for use with wood (check the back of the label) -- we have found that using Liquid Nails™ works well and is available at most home improvement stores.

Step 4 - Installation
Consult your fixture’s instructions. You may need to purchase additional hardware to make your fixture compatible with the offset of the medallion.

Before beginning, be sure to have several people available to lift and hold the medallion in place while you secure the medallion to the ceiling. With the medallion on the ground, apply adhesive liberally to the backside where it will touch the ceiling. Lift the medallion up near the ceiling and feed the electrical wires through the center of the medallion. Once the wiring is through, press the medallion against the ceiling and make sure it is properly aligned.

While your helpers continue to hold the medallion in place, use 2” sheet rock screws around the perimeter to secure it to the ceiling. On round models, there will usually be exposed holes for you to screw through.

On rectangular models screw in between the teeth on the dentil section that borders the medallion. You can later cover the screws with the supplied caps for round medallions, or touch up the screw heads with the gold paint provided for rectangular medallions.

PDF of Instructions includes weights & sizes