TypeCorner
Breadth5-1/2"
StyleSmooth
ColorWhite Primer
MaterialPolyurethane
Ceiling Height9' - 10'
Height4"
Width4"
Our MC-1001 Corners is 4" wide and 4" tall with a white Primer finish.
uDecor accent features are manufactured with a dense architectural polyurethane compound (not Styrofoam) that allows it to be very durable and 100% waterproof. This material is delivered pre-primed for paint. It is installed with architectural adhesive and/or finish nails. It can also be finished with caulk, spackle and your choice of paint, just like wood or MDF. A major advantage of polyurethane is that it is safe to install in rooms with the presence of moisture like bathrooms and kitchens. This product will not encourage the growth of mold or mildew.
For more how to videos, visit our DIY learning center
30
This was the first time we used this kind of molding. The edges did not line up with each other as good as I wished but over all I am well pleased!
This was the first time we used this kind of molding. The edges did not line up with each other as good as I wished but over all I am well pleased!
Highly recommended
if your walls are not perfect 90 deg. do not purchase. You are much better off mitering them yourself. After fighting to get them square, I ended up ripping them out and just using the crown molding instead. BUT! If your wall are, these would work well, just not for me.
My husband was not confident in cutting the angles we needed for the corners so we bought these precut pieces instead. They were very hard to install because it still required a great deal of manipulation to get the CM-1001 crown molding to line up to them on the ceiling. The corners and the molding line up perfectly before you install, but the problem is that our ceiling corners did not match the molding. I would not use them again because of the work it took to line them up on the ceiling. Also after installation you can still see the lines from where they are joined to the crown molding in some places. This was even after professional caulking and painting. Our molding still looks great but I don't like the corners when I look directly at them because of the lines that show where they are joined together.
Good product and received in timely manner.
I bought these precut corners to make my crown molding installation easier. Unfortunately, using them was not as easy as I hoped. They are cut exactly for 90 degree corners. Of the three corners where I needed to use them, only one fit well. As such, I had to do a lot of work to get the precut corners to blend in. I'm still not sure I like how they look despite using a lot of caulk to fill seams and gaps. They are great if your corners are true 90 degrees. If not, I believe you are better off cutting mitered corners and installing crown that way.
Using the corners make the job so simple and provides a very professional finish look. All joints match up so perfertly. First time I instaled crown molding; I completed the job (25 x25 room with inside and outside corners) in 4 hours. I pre-painted before hanging the molding. It was actualy fun for a 74 year old guy.
Snugs in place with uneven corner turns
lines up nicely with matching crown
Corners are off look and appeal is better with out the molds
Not having the proper machine tools, these corners made the job much easier.
Not having the proper machine tools, these corners made the job much easier.
Had to modify to make smaller
Very nice time saving product