MD-9075 Ceiling Medallion

25 Year Limited Warranty

You're making a beautiful upgrade to your home and we're here to help protect that investment. We guarantee that your polyurethane millwork will be free from manufacturing defects for twenty-five years from the original date of purchase.

Warranty Conditions and Limitations

This warranty covers material defects in our polyurethane products when used in standard applications where temperatures do not exceed 150°F. It does not cover labor, consequential or incidental damages. This warranty is not transferable and applies to the original purchaser only.

• Polyurethane products are for decorative uses only.
• Polyurethane products need a finish coat of paint during installation; it is the purchaser's responsibility to make sure their paint works well with the product (test and let dry on a small piece first).
• Before installation, allow your polyurethane product to acclimate to room temperature for 15 minutes.
• All polyurethane moldings must be installed with tight fitting joints (see installation instructions) as well as adhesive between the joints to prevent seams from expanding during changes in season.

We're Ready to Help

Unlike a car, not much can go wrong with a polyurethane product since polyurethane doesn't absorb moisture and won't be affected by insects. However, in the rare event that you do encounter a defect with your product, we're here and ready to help. Just give us a call and we'll work with you to identify the problem and, in case of defect, supply you with replacements.

RETURNS

• 90 day return window with no restocking fees
• Products must be unused/new and in their original boxes
• Customer is responsible for return shipping cost (we are happy to help arrange shipping)
• Partial returns where the quantity discount tier would change are refunded the difference between the original total and the total based on the kept quantity (see example)

INSTRUCTIONS-
Materials & Tools Needed
Screw Gun / Brad Gun
Adhesive / Caulking Gun
Caulking (paintable latex)
Utility Knife
Drill / Hole Saw

Painting
Many of our medallions have very intricate details and can be very difficult to finish once installed. We recommend painting your medallion before installing it. A high-quality spray paint, Latex or faux finishes work great. You can then touch up any areas that need attention after the installation is complete.

Adhesive
You can use any adhesive that is rated for use with polyurethane (check the back of the label) -- we have had great success using Red Devil Construction Adhesive, Loctite Powergrab and PL Premium Polyurethane Adhesive, all of which work well and are readily available at most home improvement stores.

Installation - No Fixture
Run a 1/4" continuous bead of adhesive around the outer edge and randomly in other areas on the back of the ceiling medallion. Press the medallion up into place using a few finish nails or screws to secure the medallion while the adhesive dries. Once the medallion is in place you can caulk any holes and around the perimeter of the medallion using a paintable caulking. Touch up the paint if needed.

Installation - With Fixture
If you are installing the medallion with a ceiling fan, chandelier or light, make sure the power is shut off at the breaker before attempting installation. Turning off the light switch WILL NOT prevent you from being shocked. If you have any doubts call an electrician.

Medallions are for decorative purposes only and cannot support the weight of a fan or light fixture. Your fixture must be supported by a support or junction box in the ceiling.

Many of our medallions come with solid centers to allow you to cut the correct size hole for your application. Take the bracket for your ceiling fan or light fixture and trace the area that you want to remove from the ceiling medallion. You will need a hole large enough for the wiring and holes for the bolts to pass through to affix your bracket to the junction box. The polyurethane material is easily cut so you can use a hole saw or a drill to punch out a hole. The hole doesn't have to be perfect since the fixture canopy will cover the hole.

Dry fit your medallion in place on the ceiling to make sure all of the wiring and fixture parts will fit as planned. Run a 1/4" continuous bead of adhesive around the outer edge and randomly in other areas on the back of the ceiling medallion. Feed through all the wiring and then press the medallion up into place, using a few finish nails or screws to secure the medallion while the adhesive dries.

Once the medallion is secure, attach your fixture bracket to the junction box. You may need longer bolts or a longer threaded tube that came with your fixture to accommodate the thickness of the medallion. Once the fixture bracket is in place, attach your ceiling fan or light fixture to the bracket and complete the wiring per your fixture's instructions. Once the wiring is complete slide the canopy into place to cover the hole of the medallion. Prior to doing the final finish work, turn on the breaker and test to make sure your fixture has been properly wired.

Now that you have your medallion and fixture installed, caulk any holes and around the perimeter of the medallion using a paintable caulking. Touch up the paint if needed.